Civil Engineering
Concrete lab
S.No. | List of Experiments |
1 |
Sieve G.I. Frame 45 cm: dia x 125 mm size |
2 |
Pan and Cover for 45 cm dia sieves |
3 |
Sieve G.I. Frame 30 cm dia x 100 mm |
4 |
Pan and Cover for 30 cm dia sieves |
5 |
Sieve Brass Frame 20 cm dia x 4.75 mm, 2.36 mm, 1.18 mm, 600 µm, 300 µm,150 µm,75 µm size, pan & Cover |
6 |
Sieve Shaker: Motorized, with built in digital timer |
7 |
Slum Test Apparatus: |
8 |
Compaction Factor Apparatus: |
9 |
(a)Mould Cast Iron for 150 mm cube: with ISI certification mark IS:100086 |
(b)Mould Cast Iron Cylindrical Mould: cast iron, split length wise 150 mm dia. And 300 mm height with ISI certification mark IS : 10086 |
|
10 |
Tamping Rod: made by Steel , 16 mm dia with ISI certification mark IS: 100086 Tamping bar : as per IS: 516 |
11 |
Vibration Table: Table Top 500mm x 500mm , capacity 140kg, |
12 |
Core Case |
13 |
Core Bit and Water Jacket: 25 mm dia X 75 mm long |
14 |
Concrete Permeability Apparatus: Three Cell Model for Specimen size 150 mm cube as per IS: 3085 brass / gunmetal cell of squares cross-section. pressure chamber with pressure regulator of 0-15 kg/cm. sq. gauge, foot pump for producing pressure , measuring cylinder 500 cc to measuring percolated quantity of water |
15 |
Air Permeability Apparatus (Blain Type ): IS: 4031,5516,1727 & 4828, ASTM C-204 , BS: 4359 part II . permeability cell 12.5 I.D., manometer ‘U’ type mounted on stand with a built in a stop cock, perforated disk, plunger rubber stopper, rubber tube 30 cm long . Packet of filter paper discs and a bottle of 100 cc dibutyiphalate liquid. Punch to cut filter paper discs. Non-perforated disc. Suction bulb. |
16 |
Vicat Apparatus with dashpot: with ISI certification mark , IS:5513, Vicat mould, glass base plate, initial needle , final needle, consistency plunger, mild steel base plate , Vicat mould split type with clamping ring. |
17 |
Le-Chaterlier Mould: with ISI certification mark IS:5514, Small split cylinder forming a mould of 30 mm internal dia. And 30 mm high. On either side of the split cylinder, two parallel indicating arms with pointed ends, two glass plates and lead weight. |
18 |
Flow Table: electrically operated |
19 |
Mould Steel for 70.6 mm cube: with ISI certification mark IS:10080 |
20 |
Mould Steel for 50 mm cube: with ISI certification mark IS:10086 |
21 |
Vibration Machine with built in digital counter and timer NCCBM calibrated |
22 |
Gauging Trowel : weight approx. 210 gm. Blade length approx. 200 mm |
23 |
Density Basket: as per IS: 2386 part III, Stainless steel wire mesh 6.3 mm size ruggedly constructed, 20 cm dia and 20 cm high (approx.), 15 lit. |
24 |
Universal Oven: max. 250 ˚ c |
25 |
Compression testing machine (200 ton) |